After 202610, the HOG5 official software has been changed to the x64bit version and is no longer x32bit. Please note!!

How to do it:
0: Download https://www.etcconnect.com/Hog/Documentation/#software
1: Please install Hog_PC5
2: Copy our plugin file version.dll to the Hog5 software directory: C:\Program Files\ETC\HogPC
3: Run HOG5. In the main window, click the HOG icon in the upper left corner -> Network -> Processor -> Settings -> Output -> Add Mapping. You must add at least 4 universes of ArtNet/sACN to the DP8 processor for there to be output (16 universes are added by default). You can add up to 64 universes and output 64 universes.

The first time you run HOG5, you need to set the network adapter. Please note!
This plugin supports 64 universes of ArtNet/sACN output. Because it is the official ArtNet/sACN output itself, you must pay attention to the network adapter settings. The setting method is as follows:
After running Hog5, in the first window that pops up, click "Control Panel" in the upper right corner -> "HogNet" -> Please do not select the SL04 network adapter, please select the computer's built-in network adapter or the loopback network adapter; for "FixtureNet" -> please select the SL04 box network adapter or the network adapter on the computer that is connected to the box via Ethernet cable. 
HOG5 is equivalent to having 2 network adapters, one for HogNet and one for FixtureNet (which actually uses ArtNet or sACN). 
Please note: HogNet data must not be allowed to go to the SL04 box, otherwise it will occupy the box's network bandwidth and cause unnecessary waste.


               hahan
             2026-10-30