//-------------------------------------- English ---------------------------------------------------------------------
Note: 
Our box is equivalent to the MA3 official VIZ Key box, but the software has 8 universe unlocked (8x512=4096 parameters), 
and the hardware has 4 universe 2048 output, It is also possible to take our 2 boxes and combine 8 universe with 4096 hardware outputs.

How to do it:
Plug the SL04 box into your computer and run GetDownLoad.exe to get the plugin software download address.
Please note: this download address changes frequently, and if you want to download it again, you need to run GetDownLoad again to get a new download address.

How to use the plug-in:
1: Go to the official website of MA3 to download the MA3 software and install it, support the latest version, download address: https://malighting.com
Note: MA3 is very consuming of computer resources, requires at least 4 core CPU, at least 10G or more memory, MA officially recommends using a separate graphics card, and the video memory needs to be more than 4G, if the configuration is not reached, it may not be able to run the latest version,
At present, the latest version is 2.2.5.0, the computer configuration I tested is: CPU 8 cores, memory 16G, but the graphics card is a little weaker, there is no 4G video memory, the latest version can run, but the character display is not full :( , can only be returned to a lower grade of version 2.1.1.5, can run normally. Therefore, if your computer is not configured enough, if you cannot run the latest version, it is recommended to install version 2.1.1.5.

2: Copy our plug-in to the directory of MA3 official running file, you need to overwrite the app_gma3.exe (it is recommended to back up the original app_gma3.exe file), that all. plug-in a total of 2 files, remember to add to the antivirus software whitelist.
Note: The directory of the MA3 official runtime files is C:\Program Files\MALightingTechnology\gma3_2.2.5\bin

3: At present, the plugin only opens the unlocking of 8 universe, which can support our 2 boxes, note that 8 universe will output Artnet data. 
In MA3, you don't need to set Artnet, and you don't need to set the IP, you just need to set the IP of the network card, and the box will be automatically set all.
If you want to send data to our box through Artnet, you need to set the network card IP to the 2.0.0.xxx network segment, and if you want to send data to the 3D software, you can also set IP to 127.0.0.1 or 2.0.0.xx
//------------------------------------- end English--------------------------------------------------------------------




//---------------------------------------- Chinese --------------------------------------------------------------------
说明：
我们盒子相当于MA3官方的 VIZ Key 盒子， 只是软件有8个域解锁（8x512=4096参数），硬件有4个域2048输出，
也可以接我们2个盒子，组合8个域4096硬件输出。 

插件下载方法：
把SL04盒子插入电脑，运行 GetDownLoad.exe 会得到插件下载地址。
请注意：这个下载地址会经常变化，如果要重新下载，需要再次运行GetDownLoad获取新的下载地址。
http://down.hahan123.com/down_server/SuperLightBox/grandMA3_onPC/

插件使用方法：
1：先到MA3官方网站下载MA3软件并安装好，支持最新版本，下载地址： https://malighting.com
清注意：MA3非常耗电脑资源，需要至少4核CPU，至少10G以上内存，MA官方建议使用独立显卡，并且显存需要4G以上，如果配置达不到，有可能无法运行最新版本，
目前最新版本是2.2.5.0，我测试的电脑配置是：CPU 8核，内存16G，但显卡弱一点，没有4G显存，最新版能运行起来，但字符显示不全， 只能退回到低一个档次的版本2.1.1.5，才可以正常运行。因此，如果你的电脑配置不够，如果无法运行最新版本，建议可以安装2.1.1.5版本。

2：把我们的插件拷贝到官方运行文件的目录里面，需要覆盖app_gma3.exe（建议备份原app_gma3.exe文件），这样就可以了，共2个文件，记得加入到杀毒软件白名单。
注意：官方运行文件的目录是 C:\Program Files\MALightingTechnology\gma3_2.2.5\bin

3：目前插件只开放8个域的解锁，可以支持我们2个盒子，注意8个域都会输出Artnet数据。在MA3里面无需设置Artnet，也无需设置IP，只需要设置好网卡IP就可以，盒子会自动设置。
      如果要通过Artnet传到我们盒子，需要把网卡IP设置成 2.0.0.xxx网段，如果要传到3D软件里面，也可以设置成127.0.0.1或者2.0.0.xx



                hahan
             2025.04.17